Context

Context

A rich and versatile interpretation of cement

Context is a flooring and cladding collection inspired by the ancient tradition of surfaces treated with an amalgam of marble, stone, and terracotta fragments.

Product range

Colours Decors Trim Pieces

Floors and Walls porcelain tiles

Outdoor floors 20mm porcelain tiles

Technical specs

Floors and Walls porcelain tiles

Test method Required value Average values
Water absorption ASTM C373 ≤ 0.5% 0,05%
Breaking strenght ASTM C648 ≥ 125 lbf 600 lbf (10mm) 700 lbf (11mm) 2800 lbf (20mm)
Deep abrasion resistance ASTM C1243 ≤ 175 mm3 145 mm3
Linear thermal expansion ASTM C372 NO PROVISION

α ≤ 8 x 10-6 °C-1

α ≤ 4.4 x 10-6 °F-1

Stain resistance ASTM C1378 As indicated by manufacturer A RESISTANT
Chemical resistance ASTM C650 As indicated by manufacturer A RESISTANT (Excluding hydrofluoridric acid and its derivates)
Frost resistance ASTM C1026 As indicated by manufacturer RESISTANT
Slip resistance DIN 51130
BCR-TORTUS
DIN 51097
PENDULUM AS/NZS 4586
PENDULUM BS 7976-2
 
-
 
 
 
R10 (Naturale) - R11 (Strutturato)
> 0,40
A+B (Naturale) - A+B+C (Strutturato)
P3 (Naturale) - P4 (Strutturato)

PTV 36+ wet (SI. 96) Naturale / PTV 36+ wet (SI. 96 - SI.55) Strutturato

Shade variation ANSI A137.1 As indicated by manufacturer V2 Slight variation
Flame spread ASTM E84 - CLASS A
Thermal conductivity EN 12524 - λ = 1,3 W/m °K / 0.7 BTU/ft h °F

Walls glazed white body porous single-fired tiles

Test method Required value Average values
Modulus of rupture ISO 10545-4 ≥ 35 N/mm2 18 N/mm2

Discover ZERO.3 Context

Thanks to the technological and aesthetic quality of ZERO.3, it is perfect for cladding newly constructed spaces or for practical use in the field of renovations.

Read all

Downloads

CONTEXT Tender specs pdf
Recycled content 40% - Italy Certification pdf
Please note that this website uses “session cookies” to enhance the internet experience, as well as "cookies analysis" for data analysis and "third party cookies". You can get more details and block all or some of these cookies, on the detailed information link Click here
If you continue with the navigation on this site, it is implied that you express your consent to the use of these cookies.
Slowing down today, to come back stronger tomorrow.

Today more than ever, doing business demands a strong sense of responsibility as well as the ability to be flexible, in particular at a time as dramatically complex as the one we’ve been living through over the past few weeks due to the Covid-19 situation.

Right from the start we instituted a series of strict rules for the purpose of safeguarding the health and safety of our employees in the workplace, in full respect of the regulations passed by the Italian government.

Now we have decided to temporarily halt manufacturing in our Italian sites, which will remain closed for three weeks as of this Friday 20th March because of an external economic situation that is momentarily impacting negatively the market.

Nevertheless, the company is not closing.

We are here for you, and for those who wish to continue choosing our products and to whom we will guarantee the best commercial assistance and an efficient delivery service.

We are still here, with our continuous innovation and our ongoing research into new products and solutions that we will soon be proud to launch.

We will come back even stronger than before, ready for the new challenges that await us!

18/03/2020