Prime Stone

Prime Stone

A new design featuring natural impressions and metropolitan references.

Stone’s natural spirit blends with the modern character of cement surfaces.


- Made in Italy -

Product range

Colours Decors Trim Pieces

Floors and Walls porcelain tiles

Floors and Walls laminated porcelain stoneware

Outdoor floors 20mm porcelain tiles

Technical specs

Floors and Walls porcelain tiles

Test method Required value Average values
Water absorption ASTM C373 ≤ 0.5% 0.05%
Breaking strengh ASTM C648 ≥ 250 lbf CONFORMS
Deep abrasion resistance ASTM C1243 ≤ 175 mm3 145 mm3
Linear thermal expansion ASTM C372 NO PROVISION

α ≤ 8 x 10-6 °C-1

α ≤ 4.4 x 10-6 °F-1

Stain resistance ASTM C1378 As indicated by manufacturer A RESISTANT
Chemical resistance
Lead and cadmium given off
ASTM C650
ASTM C895
As indicated by manufacturer
NO PROVISION
A RESISTANT (Excluding hydrofluoridric acid and its derivates)
NOT APPLICABLE
Frost resistance ASTM C1026 As indicated by manufacturer RESISTANT
Slip resistance DIN 51130
BCR-TORTUS
ANSI A326.3
DIN 51097
PENDULUM AS/NZS 4586
PENDULUM BS 7976-2
 
-
 
 
 
R9 (SOFT)
- (SOFT)
≥ 0.42
Shade variation ANSI A137.1 As indicated by manufacturer V2 SLIGHT VARIATION
Flame spread
Fire reaction
ASTM E84
EN 9239-1 - EN 13823
- CLASS A

CLASSE A1 FL (floor installation)

CLASSE A1 (wall installation)

Thermal conductivity EN 12524 - λ = 1,3 W/m °K / 0.7 BTU/ft h °F
Thermal shock resistance ISO 10545-9 No alterations Resistant

Walls glazed white body porous single-fired tiles

Test method Required value Average values
Water absorption ASTM C373 7% and ≤ 20% 7% < and ≤ 20%
Breaking strenght ASTM C648 ≥ 125 lbf ≥ 125 lbf
Linear thermal expansion ASTM C372 NO PROVISION

α ≤ 8 x 10-6 °C-1

α ≤ 4.4 x 10-6 °F-1

Stain resistance ASTM C1378 As indicated by manufacturer A RESISTANT
Chemical resistance
Lead and cadmium given off
ASTM C650
ASTM C895
As indicated by manufacturer
NO PROVISION
A RESISTANT (Excluding hydrofluoridric acid and its derivates)
RESISTANT
Frost resistance ASTM C1026 As indicated by manufacturer NOT RESISTANT
Shade variation ANSI A137.1 As indicated by manufacturer V1 UNIFORM APPEARANCE
Flame spread
Fire reaction
ASTM E84
EN 9239-1 - EN 13823
- CLASS A

CLASSE A1 FL (floor installation)

CLASSE A1 (wall installation)

Thermal conductivity EN 12524 - λ = 1,3 W/m °K / 0.7 BTU/ft h °F
Thermal shock resistance ISO 10545-9 No alterations Resistant
Crazing resistance ISO 10545-11 No alterations Resistant

Outdoor floors 20mm porcelain tiles

Test method Required value Average values
Water absorption ASTM C373 ≤ 0.5% 0.05%
Breaking strengh ASTM C648 ≥ 250 lbf 2800 lbf
Deep abrasion resistance ASTM C1243 ≤ 175 mm3 145 mm3
Linear thermal expansion ASTM C372 NO PROVISION

α ≤ 8 x 10-6 °C-1

α ≤ 4.4 x 10-6 °F-1

Stain resistance ASTM C1378 As indicated by manufacturer A RESISTANT
Chemical resistance ASTM C650 As indicated by manufacturer A RESISTANT (Excluding hydrofluoridric acid and its derivates)
Frost resistance ASTM C1026 As indicated by manufacturer RESISTANT
Slip resistance DIN 51130
BCR-TORTUS
ANSI A326.3
DIN 51097
PENDULUM AS/NZS 4586
PENDULUM BS 7976-2
 
-
 
 
 
R11 (STRUCT/20mm)
> 0,50
≥ 0.62
A+B+C (STRUCT/20mm)
P4
36+
Flame spread
Fire reaction
ASTM E84
EN 9239-1
- CLASS A
CLASSE A1 FL (Floor installation)
Thermal conductivity EN 12524 - λ = 1,3 W/m °K / 0.7 BTU/ft h °F
Thermal shock resistance ISO 10545-9 No alterations Resistant

Downloads

Porcelain tile Declaration of Performance pdf
Laminated Porcelain 5Plus Declaration of Performance pdf
Prime stone Tender specs pdf
Prime Stone Gres BIM zip